Read the latest Industrial Safety News at Frontline Safety
-
How to Use the ETI 7000 Moisture Meter
The ETI 7000 Moisture Meter is ideal for use by building professionals. It helps check a variety of different construction materials for moisture content. We'll walk you through the basic steps of ... -
How to Use the ETI Therma Differential Thermometer
In this short walkthrough guide, we will show you how to use the Therma Differential Thermometer from ETI. The Therma Differential digital thermometer from ETI is a thermocouple thermometer, that ... -
Facemasks for Coronavirus Outbreak: A Frontline Safety Guide
With the recent outbreak of Coronavirus and level of confusion around purchasing suitable Personal Protection Equipment (PPE) or Face Masks. Information around what types of protection are recommended has become increasingly important.
The Center for Infectious Disease Research and Policy in the United States has released information stating the World Health Organisation (WHO) have warned of a shortage in the supply of PPE. This is due to a rise in demand, confusion with purchasing and inappropriate usage of equipment.
Our guide will help make you aware of the most appropriate minimum level of protection for this particular application.
What Face Mask Should I Wear When Faced with Coronavirus?
There are certain factors you must take in to consideration when looking to purchase a disposable face mask, such as the application it's being used in and the type of contaminant being faced. Recent developments suggest Coronavirus (COVID-19) is spread via human-to-human contact, and respiratory droplets. Highlighting the need for protection when exposed to the virus.
As Coronavirus is a new illness it's not clear what exact type of Face Mask and Filter will protect against spreading the virus. But there are recommendations on what type of protection may be best suited. WHO advise the use of an FFP2 or equivalent as the minimum amount of protection when protecting against Coronavirus.
We've created a guide advising which disposable face masks are available via our website, based on recommendations by the manufacturer to provide the minimum level of protection required. Due to demand, we have limited the number of masks on this guide to those we have available in stock. For additional advice on efficient protection, contact our helpful sales team on 0141 771 7749.
How do I detect Legionella using ETI's Legionnaires Thermometer Kit?
In this guide, we'll break down the contents of ETI's Legionnaires Kit and take you through how the kit can be used. It's available to purchase here. The ETI Legionnaires Kit is a temperature ...How Do I Bump Test the BW Solo Single Gas Detector?
It’s important to bump test your gas detector before each day’s use, as recommended by the manufacturer. This helps to ensure that all sensors and alarms are functioning and responding to the ...
How Do I Calibrate My Gas Detector?
At Frontline Safety we can take care of you, even after your purchase. Our Service Centre offers a calibration and repair service for your gas detection equipment. Calibrating your detector on a ...
ETI Legionnaires' Kit - Top 5 Things You Should Know
In this guide, we'll take you through the top 5 things you should know about ETI's Legionnaires' Kit, which you can purchase here.
Watch our video overview of the product.
#1 - It’s Designed to Carry Out Legionella Testing
It’s a temperature monitoring kit and the choice of probes inside allows you to measure the temperature on various surfaces. The penetration probe is suitable for measuring water to a minimum depth of 25mm, while the ribbon surface probe can be used to take the temperature of tanks and pipes. Finally,the wire probe is designed to measure hard-to-reach or awkward places where the other probes aren’t suitable.
How to Use the Drager Accuro Pump
The Drager Accuro Pump can be an easy and cost-effective method of gas detection. The pump is compatible with over 500 different short-term gas detection tubes and is suitable for many different ...
